Tel: +86-769-22479425

E-mail: tina@u-sheen.com

Home > News > Content
Performance And Properties Of Thermal Silicone Adhesive Film
- Jun 08, 2017 -

Thermal Silicone Adhesive is usually silicone gel, its curing before the liquid glue, after curing like rubber-like elastomer, but he compared with ordinary glue, the biggest advantage is a better thermal conductivity, mainly used to Bonding or potting need to heat the device, and ordinary silica gel is generally basically no thermal conductivity, can not be a good heat. And thermal grease, is toothpaste-like, will not cure, there is no bonding performance, his role Very simple, is used to heat, such as notebook CPU cooling.If you use Thermal Silicone Adhesive, often two devices will be bonded into one, and if the use of thermal grease, it will not stick together!

Thermal Silicone Adhesive of silicone film because of a wide range of thickness selection, excellent Thermal Silicone Adhesive, construction is simple and convenient, so in many thermal interface materials, is the most widely used one. Today Xiaobian from the thermal conductivity of silicon film raw material depth analysis of thermal conductivity of silicone Thermal Silicone Adhesive and characteristics?

Thermal Silicone Adhesive is a kind of soft heat conducting sheet material with silica gel as substrate, silicone resin as bonding material, adding metal oxide and other materials, through special process, after pressing machine, and then cooling molding.

Silicone resin (basic raw materials) Insulation thermal insulation filler: Alumina, magnesium oxide, boron nitride, aluminum nitride, beryllium oxide, quartz and other silicone plasticizer. Flame retardant: magnesium hydroxide, aluminum hydroxide inorganic colorant (color distinction) Crosslinking agent (bonding performance requirements) Catalyst (process molding requirements)

Thermal Silicone Adhesive of silicone film only play a role in thermal conductivity, heat generator and heat sink between the formation of a good thermal conduction path, and heat sink, structural fixtures and other components together to form a cooling module.